Skip to product information
1 of 5

3D printed Aluminum Prop Puller

3D printed Aluminum Prop Puller

Regular price $0.00 AUD
Regular price Sale price $0.00 AUD
Sale Sold out

3D printed files for a puller to remove an Aluminum prop stuck on the motor shaft.

How to use.

  1. Remove the prop nut.
  2. Position the Boogie nose down and soak the prop and shaft for a few hours with WD40 or a similar penetrant lubrication. 
  3. Assemble the puller as shown around the prop.  
  4. Tighten the M6 bolts snug first.
  5. Apply grease to the M8 bolt to prevent galling.
  6. Slowly wind the M8 bolt with a socket to extract the prop.

When re-fitting the prop use tefgel on the prop and shaft to help prevent it getting stuck again, and remove periodically to re apply more tefgel.

3D print files:

Print in any strong material - PETG prefered.  Print almost solid - 10 walls, 3 tops and bottoms. 

Nut Retainer

Puller Top

Puller Bottom (Print 3x)

Hardware required, closest match to imperial should work as well. 

  • 6 x M6 large washers
  • 3 x M6 100mm or longerbolts.  Furniture type ones work well
  • 3 x M6 nuts
  • 1 x M8 large washer
  • 1 x M8 x 60mm or longer bolt
  • 1 x M8 nut
View full details